•  
     
     

0074- Cooler Covers

Industry: Water / Wastewater / Desalination
Problem: Corrosion / Erosion, Steel Protection
Project Goal: Cooler Protection
Location: Cyprus
Status: Completed
Products Used: CeramAlloy CP+AC used for Rebuilt, CeramAlloy CL+AC used for Protection
Project Description

New cooler covers for cruise ship in Cyprus. Even new, the cooler covers had to be grit blasted in order to achieve a CLEAN, DRY and ROUCH surface.Photo includes 6 new as well as 2 old ones that will be rebuilded with ENECON's CeramAlloy paste material.After grit blasing, the covers were cleaned of any grease/oil and other contaminants using alcohol and acetone.First coat of gray CeramAlloy CL+AC. Covers were left out in the sun for faster setting in order to accelarate the process. Second coat (CeramAlloy CL+AC blue) was then applied.All six new cooler covers were coated with two layers of ENECON's high performance, CeramAlloy CL+AC. Job accomplished in one full working day.

METALCLAD CeramAlloy CP+AC is a two component, 100% solids, polymer composite specifically formulated to provide effective repair and rebuilding characteristics on all types of fluid flow equipment. For more information about METALCLAD CeramAlloy CP+AC please visit: METALCLAD CeramAlloy CP+AC

FLEXICLAD DuraTough DL is a two component, 100% solids, fluid consistency elasto-ceramic polymer composite specifically formulated to surface and protect equipment subject to cavitation accelerated erosion/corrosion. For more information about FLEXICLAD DuraTough DL please visit: FLEXICLAD DuraTough DL

Before Work

 
 
 
 
 
 

After Work

 

After Work