ENESEAL MP/HS

WATER-BASED PENETRANT/WEATHER BARRIER FOR HORIZONTAL MASONRY, CONCRETE, BRICK AND STONE

ENESEAL MP/HS is a single component, water-based, ultra-low viscosity weather barrier which dries to a completely invisible, water repellent masonry sealer. It provides extraordinary weather protection to virtually all types of concrete, masonry and mineral surfaces.

ENESEAL MP/HS forms a hydrophobic barrier inside masonry pores that repels water and water-borne salts. This significantly reduces the damaging effects of moisture penetration into concrete and masonry, such as surface scaling, freeze-thaw cracking and corrosion of reinforcing steel.

The invisible barrier forms below masonry surfaces to depths of up to 3/4 inch and, therefore, will not wear away as a result of surface traffic and/or harsh weather conditions. This barrier is also breathable – allowing water vapor to escape from inside the concrete or masonry while dramatically reducing liquid water penetration into the substrate.

  • UV Resistant
  • Water-Based
  • Breathable
  • Invisible
  • Environmentally Safe
  • Concrete
  • Cement & Clay Tile
  • Masonry & Mortar
  • Stone
  • Brick & Block

Technical Data

  • 2 years
  • 20 kg
  • White Liquid
  • Non
  • Invisible
  • Water based siloxane / silane
  • Approx. 60 sq. ft. (5.6 sq. m.) / kg depending on porosity, texture, etc.
  • 6 hours minimum (77°F / 25°C @ 50% relative humidity)
  • 7 days (77°F / 25°C @ 50% relative humidity)

Related Projects

Physical Properties

  • Concrete brick - 1.6% Red clay brick - 0.3%
  • Concrete brick - 1/4 inch to 1/2 inch Red clay brick - 1/3 inch to 3/4 inch
  • ENESEAL® MP/HS coated concrete - rating ``0 - no scaling`` at 50 cycles Uncoated concrete - rating ``5 - severe scaling`` at 25 cycles
  • 100%
  • 30 gms / ltr
  • 50 cycles (0° F) - No effect
  • Excellent
  • Unchanged