ENECLAD FSC

FAST SETTING, HIGH PERFORMANCE POLYMER COMPOSITE FLOOR PROTECTION SYSTEM

ENECLAD FSC is a water-based, two-component coating system that has been specifically designed to seal and protect concrete surfaces that need to return to service quickly.

ENECLAD FSC is a fast setting coating which will minimize downtime. It bonds to virtually any mineral / cement substrate as well as wood.

Foot traffic in as little as 90 minutes!

  • Excellent Abrasion & Impact Resistance
  • Outstanding Adhesion
  • Safe & Simple to Use
  • Ideal for protecting concrete floors when moisture is present

Also Available in Safety Yellow

Colors

Note: Other colors are available on a “special order” basis. However, there are minimum / multiple quantity requirements for such orders and there may be an increase in cost. Additionally, due to formulation restrictions, not all colors are possible for all materials. Speak to your local ENECON Sales Representative for more information.

Due to monitor / printer differences, actual colors may vary slightly from the representations appearing in this chart.

Chemical Resistance

Gasoline EX  Detergent Solution EX 
Kerosene EX Trisodium Phosphate  EX
50% Anti-Freeze  EX 20% Calcium Chloride  EX
Transmission Fluid  EX 10% Hydrochloric Acid EX 
Power Steering Fluid  EX 10% Sulfuric Acid EX 
Motor Oil  EX 10% Sodium Hydroxide  EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Working Life and Cure Times

Ambient Temperature Foot Traffic Fork Lift Full Cure
68°F 20°C 3 hrs. 8 hrs. 3 days 
77°F 25°C 2 hrs. 6 hrs. 2 days
86°F 30°C 1.5 hrs. 5 hrs. 1 day

Technical Data

  • 25 ft2 / 2.5 m2 mils
Mixing ratio Base Activator
By Volume 4 3
By Weight 1 1
Ambient Temperature Working Life Minimum Overcoating Maximum Overcoating
59°F 15°C 30 min. 4 hrs. 24 hrs.
77°F 25°C 20 min. 2 hrs. 12 hrs.
86°F 30°C 15 min. 1 hr. 8 hrs.