•  
     
     

PRODUCTS

METALCLAD

Outstanding erosion/corrosion resistance! Repairs Damaged Equipment — Protects New Components. The Most Advanced Polymer Composite Coating System Available! METALCLAD CeramAlloy CL+AC is a 100% solids, two component, liquid polymer composite used for repairing, resurfacing and coating components to provide outstanding fluid flow erosion and corrosion resistance. When mixed, METALCLAD CeramAlloy CL+AC is a viscous liquid. CL+AC cures to a hard, ceramic-like material with an extremely smooth surface finish. High Performance Polymer Composite for resurfacing and protecting all types of fluid flow components from aggressive erosion and corrosion damage. Apply by Brush, Roller or Flexible Applicator Requires No Heat Unlimited Shelf…
Repair & rebuild all types of equipment! Engineered to Repair Deeply Damaged Components. Cures to a Metal Hard, Ceramic-Like Finish. METALCLAD CeramAlloy CP+AC is a two component, 100% solids, polymer composite specifically formulated to provide effective repair and rebuilding characteristics on all types of fluid flow equipment. METALCLAD CeramAlloy CP+AC is a paste when mixed, so it is easily applied. When cured, however, CP+AC becomes a metal-hard, ceramic-like compound. METALCLAD CeramAlloy CP+AC is the best material to use when making repairs to areas deeply damaged by erosion/corrosion environments on all types of fluid flow components. Trowelable Requires No Heat Unlimited…
Repairs to all types of equipment including in-place shaft repairs. A permanent bond to any rigid surface. Metal · Plastic · Glass · Wood · Concrete and More! METALCLAD DurAlloy is a two-component, 100% solids, multi-purpose polymer composite which can be easily machined on a lathe, drilled, tapped, filed, sanded and polished. When properly mixed, METALCLAD DurAlloy is a non-sagging paste which quickly cures to a metal-hard material creating a permanent bond to any rigid surface such as metal, plastic, glass, wood, concrete and more. Machineable Trowelable Requires No Heat Unlimited Shelf Life 100% Solids Safe & Simple To Use…
Repair, reclaim, reinforce & extend the life of all types of metal & concrete pipes & tanks. DuraWrap polymer/carbon fiber reinforced composite makes repairing and rebuilding aging, often severely deteriorated piping, tanks and other fluid flow equipment possible. The ENECON DuraWrap composite, a unique marriage of ENECON ‘s high performance polymers and cutting-edge, space-age carbon fiber technology, was specifically created to repair, rebuild, reinforce and even restore the integrity of such fluid flow systems – thereby greatly extending their service life and eliminating the need for expensive replacement. DuraWrap can be applied to the interior and/or exterior of piping and…
The Leak Stopper – and More! The First Choice for Fast, Reliable Mechanical Repairs. Available in unique, convenient ENECON® ‘A – Packs.’ METALCLAD SpeedAlloy is a quick curing, 100% solids, polymeric ‘leak stopper’ used for making fast, effective repairs to equipment which must be returned to service almost immediately. METALCLAD SpeedAlloy has a paste consistency when first mixed then transforms into a metal-hard composite in just minutes. Quick Curing Trowelable Requires No Heat Unlimited Shelf Life 100% Solids Safe & Simple To Use Pipes & Tanks Sumps Radiators & Fuel tanks Cracked & holed casings Damaged keyways Stripped threads Scored…
The Super Fast Leak Stopper! Seal leaks in minutes, without heat. METALCLAD SpeedAlloy QS begins to harden in just seconds. It is a 100% solids, high performance polymer composite that can be used to make effective repairs to all types of pipes, tanks and equipment which must be returned to service very quickly or where shut downs are not possible. METALCLAD SpeedAlloy QS is a two-component system. The simple 1:1 mixing ratio insures easy mixing. It cures to super tough composite. Pipes & Tanks Sumps Radiators & Fuel tanks Cracked & holed casings Seams Ultra Fast Curing Trowelable Requires No…
Repair & rebuild all types of equipment – even at elevated temperatures! METALCLAD® CeramAlloy® HTP is a two component, 100% solids polymer composite specifically formulated to rebuild and repair all types of fluid flow equipment that may be subject to elevated temperatures. Trowelable Requires No Heat Unlimited Shelf Life 100% Solids Safe & Simple To Use Repairs and Protects… Heat Exchanger Tube Sheets & Water Boxes Pumps Valves & Pipework Housings & Tanks 1Drum Dryers Distillation Units Stacks Scrubbers …and more
Outstanding erosion/corrosion resistance – even at elevated temperatures! METALCLAD® CeramAlloy® HTL is a two component, 100% solids, liquid polymer composite used for repairing, resurfacing and coating both damaged and new components to provide outstanding erosion and corrosion resistance at elevated temperatures. When mixed, CeramAlloy® HTL is a viscous liquid. CeramAlloy® HTL cures to a hard, ceramic-like material with an extremely smooth surface finish. It has been specifically developed for elevated temperature applications. Apply by Brush, Roller or Flexible Applicator Requires No Heat Unlimited Shelf Life 100% Solids Safe & Simple To Use METALCLAD® CeramAlloy® HTL is a High Performance Polymer…
Repair and protect all types of equipment subject to very aggressive abrasion. Engineered to repair deeply damaged components. METALCLAD CeramAlloy CBX is a three component, 100% solids, polymer composite specifically formulated to provide effective repair and rebuilding characteristics on all types of equipment subject to severe abrasion. METALCLAD CeramAlloy CBX is a paste when mixed, so it is easily applied. When cured, however, CBX becomes a metal-hard, highly abrasion resistant compound. METALCLAD CeramAlloy CBX is the best material to use to protect equipment subject to very aggressive abrasive environments. Elbows, Pipes, Pumps, Chutes, Deflector Plates, Cyclones, Separators, Vibratory Feeders, Transfer…
Repair and protect all types of equipment subject to very aggressive abrasion. Engineered to repair deeply damaged components. METALCLAD CeramAlloy EBX is a three component, 100% solids, polymer composite specifically formulated to provide effective repair and rebuilding characteristics on all types of equipment subject to severe abrasion. METALCLAD CeramAlloy EBX is a paste when mixed, so it is easily applied. When cured, however, CBX becomes a metal-hard, highly abrasion resistant compound engineered to repair deeply damaged components in the most aggressive abrasive environments. METALCLAD CeramAlloy EBX is the best material to use to protect equipment subject to very aggressive abrasive…

Page 1 of 4